Chassis and Drawbar

Laserlocked™ automatic laser cut and inter-locked 125mm x 50mm Heavy duty welded box section - hot dipped galvanized

Recessed Treg Hitch

Encased in 125mm RHS, Treg 360 degree hitch with Mechanical Handbrake

Suspension

Coil Springs, independent suspension with web tie down strap and override bump stops. RidePro Shock Absorbers.

Brakes

10 inch Dexter Electric Brakes with 3.0Amps per magnet.

Tyres, Wheels, and Jockey Wheel

31.5 x 10 Goodyear Wrangler All Terrain 15" steel radial- spoke ROH rims
Pneumatic jockey wheel with swing up bracket.

Chassis has drivers side rear re-inforced channel ready for optional Selecta-Swing-Away™ carriers. These are attached through compression sleeves and have a cam adjustable swing mechanism with saftey catch and stainless securing lock. There are 5 different carrier arm to select from:
Tripple Jerry can holder in alloy frame and "Rhino Tuff" lined; Spare Wheel and single Jerry can holder in Galvanised steel; outboard motor carrier in galvanised steel; utility plate with posts of galvanised steel; 50mm receiver welded into central position of galvanised arm so a rear bicycle carrier can be located and interchanged with the rear of vehicle.

Water Tank

70 litre Polyethylene tank with locking filler, electric automatic water pump, drainage outlet.

Storage Compartment

Lift up bed base with gas struts. Optional Stainless Steel Storage drawer now can pull all the way to outside the camper when closed.

Unipod Fibreglass Composite Storage unit lined with polyurethane "Rhino" liner for washing out and cleaning. Has optional ventilation unit for carrying refrigerator up to 80 litres in size.

70AH 12V Deep Cycle AGM Sealed Batteries standard. They can be expanded in 70Ah capacity units to a maximum of 210Ah These are maintenance free Advanced Glass Matt.
Optional Additional 12 V outlet socket for refrigerator.
Battery Charger is Intelligent 10A switched mode charger
· 1 x 12 volt interior panel light with switch.
· 1 x 12 volt interior halogen reading light with individual switches.
· 1 x 12 volt outlet sockets (internal/external).
· Voltmeter.
LED Lighting in Kamper Inside Roof and Under Bed is now standard

Body Colour

Metallic silver: 10 coats of paint on body panels -1 coat Super etch/Debeers wash primer, 3 coats Primer Filler, 4 Base coats with acrylic urethane (Two Pack) Color Over Base, 2 coats clear urethane

Rear Door Access

Access to the under bed area from the rear of the closed Kamper. Recessed rear door latches. Optional underbed stainless storage drawer pulls out when camper is closed through the rear access door.

Stainless Steel Kitchen

"Master" Slide out stainless steel kitchen. stainless steel sink. draining board. cutlery drawer/Storage under for tea towels.
Storage compartments. dining bench/Preparation/Service area.
Kitchen has electric water pump (12V) with second manual water pump/accessible when Camper is closed.
LED Stalk light for task lighting on kitchen area
Kitchen Drawer has 3 storage areas (apart from cutlery drawer)
· 290mm X 500mm X 140mm Stainless Store.
· 600mm X 500mm X 140mm Expanded Stainless Store.
· 650mm X 80mm X 140mm Stainless Cleaning Material Drawer.

Gas Struts

There are a total of 8 gas struts to assist opening and closing Kamper, storage box and raising bed for easy access under it.

Roof

Solid checker plate aluminum roof/hard floor

Body Panels

1.2mm welded Zinc anneal panels.

Roof Rack

Welded box section steel - hot dipped galvanised.

Mattress

Super Queen Size: 200cm X 160cm X 115mm Dual Layer Foam - fabric cover

Canvas Body and Optional Aw nings/Walls

All of the canvas used on the Kamper is pure duck 2 fold yarn warp & weft construction. We use Dynaproofed TM Australian made canvas throughout. This canvas still breathes air even though it is waterproof. The Dynaproofed TM production process ensures the chemical formulation is penetrated into the yarns of the base fabric. This is achieved by fully immersing the fabric into a padding bath and then sqeezing the formulation into the fibres. This system also allows the fabric to "breathe" as the woven base fabric is not sealed by a coating.
Billabong -Finished weight 12 oz.
Roof: Light Sand 15oz. Walls: Khaki Billabong -Finished weight 12 oz

2m Kwik Awning x 6.7m is standard.

Optional 2.4 metre or 2.6m x 6.7m Awning.
Optional canvas Walls, door and mesh windows to completely enclose the Annex and Camper.
Optional Tropical Hi-Top Tropical Roof with integrated bow structure for air flow in summer and reduced condensation in winter. The Hi-Top roof stays on the Camper even when closed and is maintenance free.

Optional Second Bedroom

Optional Ensuite Bathrrom

Weather Dust Seal

Molded rubber EPDM seal.

Recessed Tail Lights

Recessed sealed tail lights to prevent damage.

Front Storage Box

Steel top loading with space for canvas and camping equipment

Molded Interior

One piece Polyethylene molded interior - dustproof!

Front Accessories

Double Jerry Can Holder, 2 x 4Kg Gas bottle holder.

Weight

Tare 790kg dry weight with alloy wheel option. Wet weight with water tank full, Batteries, gas bottle full and canvas awning of 980kgs Drawbar 80-100kgs