Chassis and Drawbar

150mm x 50mm Heavy duty welded box section - hot dipped galvanized

Recessed Treg Hitch

Encased in 150mm RHS, Treg 360 degree hitch with Mechanical Handbrake

Suspension

Independent trailing arm coil spring, 2000 kilogram bearings. Stub axles have 50mm shaft for bearings. Coil Springs, independent suspension with web tie down strap and override bump stops. FOX™ mono-tube Shock Absorbers.

Brakes

Hydraulic Disc Brakes with parking brake. Optional Electronic Disc Brakes

Tyres, Wheels, and Jockey Wheel

Either 31 x 10.5R x 15" steel radial-silver spoked ROH rims or matched to towing vehicle as an option. This is generally 275/- x 16 Goodyear Wrangler Tyres.
3 New rims and tyres. Hydraulic disc brakes, with manual parking brake.
Pneumatic jockey wheel with swing up bracket.

Chassis has drivers side rear re-inforced channel ready for optional Selecta-Swing-Away™ carriers. These are attached through compression sleeves and have a cam adjustable swing mechanism with saftey catch and stainless securing lock. There are 5 different carrier arm to select from:
Triple Jerry can holder in alloy frame and "Rhino Tuff" lined; Spare Wheel and single Jerry can holder in Galvanised steel; outboard motor carrier in galvanised steel; utility plate with posts of galvanised steel; 50mm receiver welded into central position of galvanised arm so a rear bicycle carrier can be located and interchanged with the rear of vehicle.

Water Tank

120 litre water tank with locking filler, electric automatic water pump, drainage outlet.

Storage Compartment

Lift up bed base with gas struts. Optional Stainless Steel Storage drawer can pull all the way to outside the camper when closed.

70Ah 12V Deep Cycle AGM Sealed Batteries standard. They can be expanded in 70Ah capacity units to a maximum of 210Ah These are maintenance free Advanced Glass Matt.
Optional Additional 12 V outlet socket for refrigerator.
Battery Charger is Intelligent 10A switched mode charger
· 1 x 12 volt interior panel light with switch.
· 1 x 12 volt interior halogen reading light with individual switches.
· 1 x 12 volt outlet sockets (internal/external).
· Voltmeter.

Body Colour

Metallic silver: 10 coats of paint on body panels -1 coat Super etch/Debeers wash primer, 3 coats Primer Filler, 4 Base coats with acrylic urethane (Two Pack) Color Over Base, 2 coats clear urethane

Rear Door Access

Access to the under bed area from the rear of the closed Kamper. Recessed rear door latches. Optional underbed stainless storage drawer pulls out when camper is closed through the rear access door.

On Kitchen side:
Incorporating 2 burner/1 griller stainless steel gas stove with quick-connect gas fittings.
Stainless Steel Fridge Slide. Optional Stainless Steel Super Pantry Drawer 1100mm D x 520mm W x 600mm H. Pantry/Fridge Slide Combo The actual clear size for fridge on the fridge slide is.920mm x 520mm W x 555mm H
The total cubic volume is 0.34cubic meters.
Plus additional pantry locker under cooker of 440mm W x 295mm H x 140mm D.
Optional Filtered ventilation kit for refrigerator with 12V fan and industrial replaceable filters,
There is storage space above the cooker for a removable container that holds a billy etc of 320mm D x 460mm L x 200mm H.
LED Lighting integrated into the Gullwing Door above the Cooking/Pantry Area
On drivers side:
Incorporating 3 x Jerry with tie down, and an additional storage space 1300 D x 480mm W x 665mm H ventilated storage for outboard or generator and/or porta potti, etc
LED Lighting integrated into the storage area and sealed to be suitable for a flammable area
NEW - Alluminium Gullwing Box is available on the Limited Edition as an option - see Platinum Specifications for features.

Stainless Steel Kitchen

NEW -"Master" Kitchen Slide out stainless steel kitchen. stainless steel sink. draining board. cutlery drawer/Storage under for tea towels.
Storage compartments. dining bench/Preparation/Service area.
Kitchen has electric water pump (12V). with second manual water pump/accessible when Camper is closed.
LED Stalk light for task lighting on kitchen area
Kitchen Drawer has 3 storage areas (apart from cutlery drawer)
· 290mm X 500mm X 140mm Stainless Store.
· 600mm X 500mm X 140mm Expanded Stainless Store.
· 650mm X 80mm X 140mm Stainless Cleaning Material Drawer.

Gas Struts

There are a total of 8 gas struts to assist opening and closing Kamper, storage box and raising bed for easy access under it.

Roof

Solid checker plate aluminum roof/hard floor

Body Panels

1.2mm welded Zinc anneal panels.

Roof Rack

Welded box section steel - hot dipped galvanised reinforced to take Boat Loader.

Mattress

NEW Super Queen Size: 200cm X 160cm X 115mm Dual Layer Foam - fabric cover

Canvas Body and Optional Awning and walls

All of the canvas used on the Kamper is pure duck 2 fold yarn warp & weft construction. We use Dynaproofed™ Australian made canvas throughout. This canvas still breathes air even though it is waterproof. The Dynaproofed™ production process ensures the chemical formulation is penetrated into the yarns of the base fabric. This is achieved by fully immersing the fabric into a padding bath and then sqeezing the formulation into the fibres. This system also allows the fabric to "breathe" as the woven base fabric is not sealed by a coating.
Billabong -Finished weight 12 oz.
Roof: Light Sand 15oz. Walls: Khaki Billabong -Finished weight 12 oz

2m x6.7m Kwik Awning is standard

Optional 2.4 m, 2.6m x 6.7m Awning.
Optional canvas Walls, door and mesh windows to completely enclose the Annex and Camper.
LED Lighting in Camper Inside Roof and Under Bed
Optional Tropical Hi-Top Tropical Roof with integrated bow structure for air flow in summer and reduced condensation in winter. The Hi-Top roof stays on the Camper even when closed and is maintenance free.

Weather Dust Seal

Molded rubber EPDM seal.

Recessed Tail Lights

Recessed sealed tail lights to prevent damage.

Pole Carrier

Integrated into Gullwing Storage Pak

Molded Interior

One piece Polyethylene molded interior - dustproof!

Front Accessories

Triple Jerry Can Holder, 2 x 4Kg Gas bottle holder.

Weight

Tare 980kg dry weight with alloy wheel option. Wet weight with water tank full, Batteries, gas bottle full and canvas awning of 1250kgs Drawbar 120kgs
Mariner Pak increases drawbar weight, though position of boat can reduce the drawbar weight as well.

Dimensions

Overall with Camper open

Overall closed body

Overall body Width including Guards

A-Frame length

Exterior height of closed Camper without boat loader

6.3m

4.35m

1.95m

2.55m

1.4m