Chassis and Drawbar

125mm x 50mm Heavy duty welded box section - hot dipped galvanized

Recessed Treg Hitch

Encased in 150mm RHS, Treg 360 degree hitch with Mechanical Handbrake

Suspension

Independent trailing arm coil spring on every model.

As Standard with Electric Brakes: 1500 kilogram bearings Coil Springs, independent suspension with web tie down strap and override bump stops. Ridepro Twin Tube (traditional off road) Shock Absorbers.

With Fox Shock Upgrade: 2000 kilogram bearings. Stub axles have 50mm shaft for bearings. Coil Springs, independent suspension with web tie down strap and override bump stops. Fox Monotube Shock Absorbers.

Brakes

Electric (Drum) Brakes as standard.

Optional Hydraulic Disc Brakes with parking brake.

Optional Electronic Disc Brakes (operated by same brake controller as on Electric Drum Brakes)

Tyres, Wheels, and Jockey Wheel

Either 31 x 10.5R x 15" steel radial-silver spoked ROH rims or matched to towing vehicle as an option. This is generally 275/- x 16 Goodyear Wrangler Tyres.
3 New rims and tyres. Hydraulic disc brakes, with manual parking brake.
Pneumatic jockey wheel with swing up bracket.

Internal Construction

Alloy internal construction

Selecta-Swing-Away™

Chassis has drivers side rear re-inforced channel ready for optional Selecta-Swing-Away™ carriers. These are attached through compression sleaves and have a cam adjustable swing mechanism with saftey catch and stainless securing lock. There are 5 different carrier arm to select from:
Tripple Jerry can holder in alloy frame and "Rhino Tuff" lined; Spare Wheel and single Jerry can holder in Galvanised steel; outboard motor carrier in galvanised steel; utility plate with posts of galvanised steel; 50mm receiver welded into central position of galvanised arm so a rear bicycle carrier can be located and interchanged with the rear of vehicle.

Deflecta-Shield™

Front stone deflectors are alloy protective shields. 610mm x 270mm Heavy Duty Mud Flaps and under chassis hot dipped galvanised stone and gibber deflector. Front of Delta Gullwing is shaped downward and coated in Polyurethane material as a stone deflector

Water Tank

70 Litre Tank is standard with optional 120 litre tank with locking filler, electric automatic water pump, drainage outlet (both the 120litre and the 70 litre polyethylene tanks can be fitted as options).

Storage Compartment

Lift up bed base with gas struts. Optional Stainless Steel Storage drawer can pull all the way to outside the camper when closed.

Power Pak (12V): Optional

70AH 12V Deep Cycle AGM Sealed Batteries standard. They can be expanded in 70Ah capacity units to a maximum of 210Ah These are maintenance free Advanced Glass Matt.
Optional Additional 12 V outlet socket for refrigerator.
Battery Charger is Intelligent 10A switched mode charger
· 1 x 12 volt interior panel light with switch.
· 1 x 12 volt interior halogen reading light with individual switches.
· 1 x 12 volt outlet sockets (internal/external).
· Voltmeter.

Genuine LED Flexi-Strip™ Lghting

Patented LED Lighting in Kamper Inside Roof and Under Bed . The Lighting has recessed cabling in the camper bows. It consumes only 3 Watts of power.

Fridge/Utility Frame : Optional

Optional Fridge/Utility Frame for front of camper for refrigerator up to 40litres in size.

Body Colour

Metallic silver: 10 applications: on body panels -1 coat Super etch/Debeers wash primer, 3 coats Primer Filler, 4 Base coats with acrylic urethane (Two Pack) Color Over Base, 2 coats clear urethane

Rear Door Access

Access to the under bed area from the rear of the closed Kamper. Recessed rear door latches. Optional underbed stainless storage drawer pulls out when camper is closed through the rear access door.

Delta Gullwing Storage

Alloy Construction with Reinforced sub-frame glued with poly urethane material and bolted through for fatigue free life.

On Kitchen side:
Cooker Slide incorporating 2 burner & 1 griller with optional dual slide with 14.5Mj WOK burner

Optional 73 Litre Autofridge on Stainless Steel Fridge Slide

Optional Patented Filtered ventilation kit for refrigerator with 12V fan and industrial replaceable filters.

High-intensity LED Lighting integrated into the Gullwing Door above the Cooking/Pantry Area

On drivers side:
Incorporating additional storage space or porta potti, etc
LED Lighting integrated into the storage area

On Front Section

Suitable for 2 x Jerry Cans and Generator Storage partitioned from rest of the Delta Storage.

Stainless Steel Kitchen

NEW "Master" Slide out stainless steel kitchen. stainless steel sink. draining board. cutlery drawer/Storage under for tea towels.
Storage compartments. dining bench/Preparation/Service area.
Kitchen has electric water pump (12V) with second manual water pump/accessible when Camper is closed.
LED Stalk light for task lighting on kitchen area.
Kitchen Drawer has 3 storage areas (apart from cutlery drawer)
· 290mm X 500mm X 140mm Stainless Store.
· 600mm X 500mm X 140mm Expanded Stainless Store.
· 650mm X 80mm X 140mm Stainless Cleaning Material Drawer.

Cooker

2 Burner plus griller cooker

Gas Struts

There are a total of 8 gas struts to assist opening and closing Kamper, storage box and raising bed for easy access under it.

Roof

Solid checker plate aluminum roof/hard floor

Body Panels

1.2mm welded Zinc anneal panels.

Roof Rack

Welded box section steel - hot dipped galvanised.

Mattress

Super Queen Size: 200cm X 160cm X 115mm Dual Layer Foam - fabric cover

Canvas Body and Optional Awning and walls

All of the canvas used on the Kamper is pure duck 2 fold yarn warp & weft construction. We use Dynaproofed TM Australian made canvas throughout. This canvas still breathes air even though it is waterproof. The Dynaproofed TM production process ensures the chemical formulation is penetrated into the yarns of the base fabric. This is achieved by fully immersing the fabric into a padding bath and then sqeezing the formulation into the fibres. This system also allows the fabric to "breathe" as the woven base fabric is not sealed by a coating.
Billabong -Finished weight 12 oz.
Roof: Light Sand 12oz. Walls: Khaki Billabong -Finished weight 12 oz

2m Awning x 6.7m Kwik Awning is standard.

Optional 2.4 metre or 2.6m x 6.7m Awning.
Optional canvas Walls, door and mesh windows to completely enclose the Annex and Camper.
Optional LED Lighting in Camper Inside Roof and Under Bed
Optional Tropical Hi-Top Tropical Roof with integrated bow structure for air flow in summer and reduced condensation in winter. The Hi-Top roof stays on the Camper even when closed and is maintenance free.

Weather Dust Seal

Molded rubber EPDM seal.

Recessed Tail Lights

Recessed sealed tail lights to prevent damage.

Pole Carrier

Stainless Steel Pole carrier mounted on front frame

Molded Interior

One piece Polyethylene molded interior - dustproof!

Front Accessories

Tripple Jerry Can Holder, 2 x 4Kg Gas bottle holder.

Weight

Tare 900kg dry weight with alloy wheel option. Wet weight with water tank full, Batteries, gas bottle full and canvas awning of 1150kgs Drawbar 100kgs

Overall with Camper open

6.3m

Overall closed body

4.35m

Overall body Width including Guards

1.95m

A-Frame length

2.55m

Exterior height of closed Camper without boat loader

1.4m